Use Your Stash - Embossing (Faux Leather)

Hi Everyone.

This is Michelle from Lady of Leisure Ink, making my debut as a guest designer here on Paper Craft Weekend Challenge.  Thank you so much Allison and Caroline for giving me this opportunity.  I really am very new to this whole blogging world, and probably would not have even started my own blog had it not been for some 'threats' (I mean 'encouraging' ) words from a few friends (you know who you are.) All that having been said, let's get on with the challenge.

As tempted as I was to go out and buy something new to try for this post, I stayed true to the theme and used my stash - embossing folders and powders.  Here is my project.

This is not a completely new project, some of you may have seen this purse over on the Cricut message board, but I wanted to revamp it a bit and try a new technique - Faux Leather.  I started with  2 handbag shapes from Kate's ABC's (height 5.09") Use the Gypsy to flip one bag and then weld the bottoms of the bags together with a rectangle from George (height 3.6" and width 1.86")  Here is a screen shot of my Gypsy with the pattern ready to go.

The other pieces to cut out (keeping the same height) are the handles and the handbag flap.  Once all the pieces are cut you need to make an accordion fold on the rectangle like this.

Now we get to the embossing part, take your embossing folder and run each side of the handbag through a cuttlebug/sizzix machine.  I used the 'Bubble' folder, but the 'Mosaic' folder works even better.  Once the hand bag is embossed take an ink pad and randomly rub across the whole bag, including the flap.

Next, cover the one side of the bag with Versamark, sprinkle with clear embossing powder and heat set. It is much easier to do this one side at a time.

Attach the handles and flap, (I also used a brad for the 'clasp')  Here is a look at how I finished off the inside (the velcro dots come in very handy for keeping the card closed.)

I hope you will join in the challenge this weekend if you are able, and post your project using the link below.  Thanks once again Allison and Caroline for inviting me in to be guest designer.

Michelle

September Technique Tuesday - Heat Embossing

Hi, Caroline here with our first Technique Tuesday. Technique Tuesday will be the first Tuesday of each month. Technique Tuesday will be where anything goes. It could be a tutorial, tips and tricks, organization ideas, a new product we found. Basically it will be anything we wish to share that month with our readers. For this month we decided we would talk about embossing. Why embossing? Well cause Allison calls me the embossing queen.

There are 2 types of embossing. The first is "dry embossing" as I call it. Dry embossing uses texture plates or embossing folders. There are several different brands and types. I prefer the cuttlebug or sizzix embossing folders that can be used in many different types of machines. We won't talk about how many embossing folders Caroline has .... but let's just say that's part of the reason Allison calls me the embossing queen. The second type of embossing is "heat embossing". Wet embossing uses ink and embossing powders which you melt or set with a heat gun.

Since heat embossing requires a bit more technique we will focus on that today. In order to heat emboss you will need the following supplies:

1. Embossing powder
2. Versamark Ink pad (or any wet ink pad (slow drying)), I prefer versamark.
3. Heat gun
4. Stamp(s)
5. Static buddy
6. Cardstock



First cut your cardstock to the size you want. I always make my cardstock slightly larger than I need so that I have an edge to hold when heating the powder. You can always trim the excess off after you've set the powder.

Rub your static buddy on your paper. If you don't have a static buddy you can try rubbing a used dryer sheet on your paper. However, I found that the dryer sheet wasn't working completely and got frustrated and picked up a static buddy from Michael's for a few dollars.



Stamp your ink pad onto your stamp. I find the best way to apply ink to the stamp is to turn the stamp over and dab the ink pad onto the stamp. You can actually see the ink on the stamp then.



Stamp your stamp image on your paper. Make sure to use strong even pressure



Remove your stamp from the paper and you should see a watermark image on your paper



Sprinkle your embossing powder over your stamped image.



Remove the excess embossing powder and return to the container



Heat the embossing powder with your heat gun. Be sure to continue to move the heat gun over the paper or you could burn the paper. You will see the powder change from little grains to one thick coat. If you don't have a heat gun you can use your toaster oven and place a little metal tray on top of the oven and stick your paper on the metal tray. Do not leave the paper unattended as it can burn if your oven gets to hot.

If your paper wrinkles, like the picture below turn your paper over and put a little bit of heat on the back of the paper and it will flatten the image.



Trim your image to fit your project needs and complete your project


You can also use the verasmark pen to do writing on your project or outline an image





To see more of my heat embossing projects your can see them on my blog Caroline's Heat embossing projects

Now it's your turn. We'd love to see what you've done with heat embossing. Use the inlinkz option below and upload your projects.

Do you want to win some blog candy???? Look what Allison has up for grabs for all of our Paper Craft Weekend Challenge readers.

Cricut markers, flocking powder set, chipboard shapes, stickers, and embellies set

All you have to do to win is leave a comment here and be a follower. If you upload a heat embossing project you will get a second entry to the drawing. Drawing will be held on Monday September 12th.

Hope you've enjoyed our exploration into Heat Embossing.

---Caroline